Topic: FMC122 and FMC204 schematic  (Read 4460 times)

milos February 25, 2014, 11:15 AM

  • Member
  • *
  • Posts: 2
Dear All,

Could you please advise where can I find a detailed schematic diagrams for FMC122 and FMC204? I am aware of the info available on the 4DSP site but is there more to it?

Many thanks,

Regards
Milos

arnaudNL February 25, 2014, 12:29 PM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Milos,


The schematics are not provided to customers. Let me know if any information is missing from the user manual I will then get this information added. Both of these products were implemented many times by our customers so I would expect all the information required being part of the documentation, firmware and software.


Best Regards,
Arnaud

milos February 25, 2014, 12:55 PM (#2)

  • Member
  • *
  • Posts: 2
Dear Arnaud,

Thanks for the prompt reply. For the time being I am fine. I was just wondering if I was missing something.

Thanks
Milos

arnaudNL February 26, 2014, 05:09 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.