Hi all,
i have finished modifying the 286_zc702_fmc30rf design.
Everything is fine now. I have inserted my own design in the existing ISE design and
modified the visual C++ software application. When i setup the board using :
C:\Xilinx\14.5\ISE_DS\EDK\bin\nt64\xmd -tcl download_elf.tcl zc702_host_if.elf 286_zc702_fmc30rf.bit
i get what i need. Now, i would like to make the board booting from the SDcard.
I need to create a BOOT.BIN with : fsbl_0.elf, 286_zc702_fmc30rf.bit and zc702_host_if.elf.
i have made a fake project to create an fsbl.elf then the BOOT.BIN file.
the board boot correctly, but when i run the visual C++ application, the clock frequencies are not correct.
i suppose that something is not initalizing correctly.
i have tried to recreate an SDK project from the SD166 ZC702 host interface star, without any success.
i'm stucked on page 17 of the pdf documentation.
Question : do you have an fsbl.elf file that could boot the ZC702 + FMC30RF from SDcard ?
regards