Topic: Reference design for ISE EDK using Microblaze  (Read 4760 times)

hzh0608 February 26, 2014, 06:26 AM

  • Member
  • *
  • Posts: 4
    Is there a reference design for ISE EDK project because I want to use FMC30RF as IP core in Microblaze?  How can I get it ?
    I have purchased 4 FMC30RFs, but in my application, I need use it as a IP core in my EDK project, and transmit data through DMA and axi_ethernet in Microblaze.

    Thanks.

    Marchzh

arnaudNL February 26, 2014, 07:41 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,


We do not have such design.


The reference designs coming with the BSP are RTL/VHDL so you can surely use that as you wish.


We do have FMC30RF support on Zynq (zedboard, zc702 and zc706) and these reference designs are part of the BSP already. In this case we are not using axi_ethernet but the EMAC peripheral in the Zynq device.


4DSP can surely create a microblaze design for you but you should expect NRE costs and this should be discussed with sales@4dsp.com or saleseurope@4dsp.com




Best Regards,
Arnaud

arnaudNL June 13, 2014, 07:23 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.