Topic: Using both FMC645 & FMC116 on the same Xilinx VC707  (Read 8930 times)

zeevs June 10, 2013, 06:52 PM

  • Member
  • *
  • Posts: 8
Hi,


I would like to use simultaneously both FMC645 & FMC116 (occupying both HPC slots)
Are there any recommendations or reference how to merge FPGA designs?


Thanks


Zeev

arnaudNL June 11, 2013, 06:09 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Zeev,
You will need to change the UCF constraints of one design in order to target the other HPC slot and merge the files. The easiest would be to proceed with these modification inside ISE Navigator as StellarIP generated two working project.
Best Regards,
Arnaud

zeevs June 14, 2013, 04:51 AM (#2)

  • Member
  • *
  • Posts: 8
Hi Arnaud,


do you have a description/list of FPGA pins that can be connected to the second HPC slot and I can use them for FMC116?


Thanks


Zeev



arnaudNL June 18, 2013, 11:37 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Zeev,


FPGA Pins are carrier dependent and we have not targeted the other connector ourselves. I believe the documentation for the Xilinx evaluation boards has the complete pin list for both FMC connectors.


Best Regards,
Arnaud