FMC 150 with Spartan LX75T board from Avnet

Hi


I am a R&D Engineer, I have currently purchased FMC 150 ADC DAC Daughter card from Avnet. I want to use this card with my Avnet LX75T developement board.


I have installed all the necessary softwares from 4DSP.


When i start the software it says no device detected.


How to move ahead in the process of identifying the device over the software?


Please Help?


Thanks
Amit Khare

When I start FMC Analyzer


I get a error


the error is shown in the image attached.


How to add custom board to the FMC Analyzer?


Thanks
Amit Khare
9650435016

Dear Sir,


This have nothing to do with the hardware yet; The software is not able to communicate with API or the Driver.


Try to run the software from C:\Program Files (x86)\4dsp\FMC Analyzer that should work better.


As far as the custom board is concerned, we do not provide support for custom boards unfortunately. If you keep the firmware same, the software should work as is. Note that an application FMC150App is provided with the development kit. The FMC Analyzer product is using the same code.


VC707, KC705 and ML605 are Xilinx development board officially supported, nothing else!


Best Regards,
Arnaud

Thanks for the reply.


What abput SP605? Is this board supported ?




Thanks
Amit Khare

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.