Error during MAP with ISE 14.7 64bit

ISE 14.7 (64bit) returns the following error during MAP when i'm generating the bitstream of the reference design (ML605 FPGA board).

Code: [Select]

ERROR:PhysDesignRules:2506 - Incorrect placement for a BUFR component. BUFR
   sip_fmc110_0/fmc110_if_inst/ads5400_phy_inst0/serdes_v6_inst0/bufr_inst_clk_div in clock region CLOCKREGION_X0Y3 is
   driven by a CCIO adc0_clka_p_0 in clock region CLOCKREGION_X0Y1. The BUFR should be placed in the same clock region
   as the CCIO or the CLOCK_DEDICATED_ROUTE constraint should be used on the net
   <sip_fmc110_0/fmc110_if_inst/ads5400_phy_inst0/serdes_v6_inst0/clk_in_int>.

ERROR:Pack:1642 - Errors in physical DRC.

Does anyone know how to fix this error?

Best regards

HI,


I was able to generate a bit file using ISE 14.6. I advice to switch to this version of ISE.


Best regards,
Erik

Thank you for your reply.
I'm going to try ISE 14.6

Best regards

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.