Dear Murthy,
I haven't received the serial number from you. I am helping you again but please provide me with the actual FMC112 serial number..
Please look at this part from my previous post about where to get the installer and is the ref design is only a bit file:
You can register your product from http://www.4dsp.com/fmc/bsp, you will get a license file as well as download a BSP containing all the elements you need. The reference firmware/software configures the complete chipset during runtime, you will be able to experiment with settings as much as you want without spending firmware recompilation times.
There is a 4FM Getting Started Guide covering how to run the reference design. A software application (delivered precompiled and as source code, same as the firmware) configures the chipset and save data buffers on the hard disk. This buffers can then be analyzed. Location of software/firmware/documentation is also covered by the same user manual. To give you some pointers:
- Firmware source code is extracted under C:\Program Files (x86)\4dsp\Common\Firmware\Extracted
- Software source code is installed under C:\Program Files (x86)\4dsp\FMC Board Support Package\Refs\Software
- Firmware documentation is available in doc folders in the firmware source code.
- Software documentation is available in the software project in doxygen format.
- Hardware documentation is available under C:\Program Files (x86)\4dsp\FMC Board Support Package\Documentation
- Other documentation is available under C:\Program Files (x86)\4dsp\4FM Core Development Kit\Documentation
Best Regards,
Arnaud