Topic: PCIe Express  (Read 11348 times)

wmaguire February 11, 2014, 11:05 PM

  • Member
  • *
  • Posts: 14
Hi all,


Just wondering if there are any example code/projects available regarding the initialization of the PCIe device on this card.


Regards




Walter

arnaudNL February 12, 2014, 07:55 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Walter,


Our reference design has a PCI root complex on the the FPGA side (microblaze system) and the DSP is used as slave. Our reference design uses PCIe BOOT in order to load codes in the DSP.


We do not have TMS320C6455 slave examples as we only rely on the chip's ROM bootloader PCI host boot and in this mode the TMS320C6455 is configured properly.


I am attaching the BSP user manual for your convenience there you will have more details about the design architecture, it is pretty handy all together; The DSP is somehow running in a jailed environment from a host software.


Best Regards,
Arnaud

arnaudNL June 13, 2014, 07:18 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.