Hello again everyone,
My application involves needing to synchronize the DAC output and ADC input (so that, say, every tenth data point is captured by the ADC, as 0, 10, 20, ...), or at least gain an idea of the time lag so I can prefix zeros on my output buffer. Is there a good way to do this? I've noticed that writing a 5 to the FMC176_CTRL_COMMAND register doesn't trigger the ADC, and I'd love to have an easier solution than having to dig into the HDL, find whatever process minds this register, and change it to suit my needs (likely breaking some other functionality).
Thanks in advance,
Matt