Topic: buffer size in fmc104  (Read 3913 times)

robinhood12 June 04, 2013, 12:28 PM

  • Member
  • *
  • Posts: 10
The reference software allows maximum buffer size of 32*1024. Any size higher than this gets error communicating with adc. Is there any way to increase this buffer size or time of acquisition from a single adc?

arnaudNL June 05, 2013, 02:57 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,
This limitation is about having a 64kB FIFO in the firmware. You would need to use a hardware memory instead of the FIFO 64kB in order to buffer more data. This is integrator responsibility.
Best Regards,
Arnaud