Hi all,
I'm attempting to get some board communication going, but it's not working out so well.
I open iMPACT, and I see the CPLD and the FPGA. I bypass the CPLD (i.e. leave it alone) and program the FPGA with the bitstream from the Recovery directory, "348_vc707_fmc176.bit." I then open a command prompt and change directory over to "Bins." From there, my Fmc176APP.exe returns this output:
Number of devices found : 2
0. \DEVICE\{6B0E5B94-39A4-4850-8611-EE527F708A2F}
- Realtek PCIe FE Family Controller - Deterministic Network Enhancer Miniport
1. \DEVICE\{39295E7B-A268-4F48-B5A9-3E1252CD8A54}
- Realtek RTL8191SE 802.11b/g/n WiFi Adapter - Deterministic Network Enhancer Miniport
Seeing this, I run the command
Fmc176APP.exe 1 VC707 0 0
.
However, it returns
Could not obtain sipcid table (error fffffff), exiting
I've run through the FAQ and I have done everything it suggests. My jumpers are all in their default positions; the changes I have made are that SW2 is in position 01000000 and SW11 is in 11010. I have successfully run the Xilinx SGMII example from this configuration, so I believe my Ethernet communication is working. When I capture off my Ethernet controller, I see five packets come from QuantaCo_03:eb:a6, addressed to 34:44:53:50:30:31. They appear to be well formed, but I see no response on the line from the board. I've also built a binary from the extracted *.sdf file, but it also produces no output with the same process on the same configuration.
So what am I missing?