Topic: 64 Bit Board Support Package  (Read 9976 times)

FPGAengr May 15, 2013, 01:05 PM

  • Member
  • *
  • Posts: 32
 I am writing a GUI in Matlab to send data to the FPGA using the 4DSP Ethernet module, but the .h, .lib, and .dll files needed on the PC are 32 bits and my 64 bit Matlab won't compile. Is there a 64 bit version of the board support package available?

arnaudNL May 15, 2013, 05:53 PM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Hello,
We have recently ported our driver/api towards native 64 bit but it is very early material, barely beta. Note that we don't expect problem, lack of soak testing.
I assume you might be interested to use the given components, the actual dlls, libs and headers as well as the device driver running natively on 64 bit. The chery on the cake being DMA using the whole computer memor space; implictly no bounce buffering done by the OS.
I can prepare an archive with this components if you wish, just let me know!
Best Regards,
Arnaud

FPGAengr May 16, 2013, 10:46 AM (#2)

  • Member
  • *
  • Posts: 32
I would like the 64 bit archive.
 
Thank you.

arnaudNL May 21, 2013, 03:12 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,


I will prepare you an archive somewhere this week.


Best Regards,
Arnaud

arnaudNL May 21, 2013, 06:12 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Hello Mark,


I've sent you the zip archive by mail.


Best Regards,
Arnaud

FPGAengr May 21, 2013, 10:55 AM (#5)

  • Member
  • *
  • Posts: 32
Did you send it by postal service mail? I have not received an email.
 
Thank you.

arnaudNL May 22, 2013, 05:03 AM (#6)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Mark,


It was sent to your email yesterday 11h12 a.m. Amsterdam time.


The topic is : FW: 64 bit SDK


You are the main recipient


Michael as well as support @ 4dsp are in cc.


I haven't got any email back indicating the email was not delivered.


Best Regards,
Arnaud

FPGAengr May 22, 2013, 10:52 AM (#7)

  • Member
  • *
  • Posts: 32
Our email filter may have deleted the message because of the attachment. If you are sending a .zip file please change the extension to .pdf so it will pass the filter. I will change it back once it arrives.

Thank you.

arnaudNL May 22, 2013, 11:05 AM (#8)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Hello Mark,


I've sent it again as a pdf attachement.


Let me know when you get it!


Thanks,
Arnaud

FPGAengr May 28, 2013, 11:02 AM (#9)

  • Member
  • *
  • Posts: 32
I have not received the email. Please send and email without an attachment to ensure the correct address is being used.

Thank you.

arnaudNL May 30, 2013, 09:43 AM (#10)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Mark,


Have you got the archive or not, just for completeness


Thanks,
Arnaud

curryj March 11, 2014, 04:30 PM (#11)

  • Member
  • *
  • Posts: 31
Hello,

Has the 64-bit build been incorporated into the main BSP installation? I have 2.221.1 installed right now and I can't seem to find any x64 binaries.

Thank you!
Jim Curry

arnaudNL March 11, 2014, 04:46 PM (#12)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Hello Jim,


Not not yet, we lacked of some feedbacks!


Best Regards,
Arnaud

curryj March 11, 2014, 05:37 PM (#13)

  • Member
  • *
  • Posts: 31
Arnaud,

Is it possible for you to send me the 64-bit build over email, like you did for FPGAengr back in May?

Thanks!

-Jim

curryj March 13, 2014, 06:05 PM (#14)

  • Member
  • *
  • Posts: 31
Arnaud,

Any progress on this? It is a time-sensitive issue for us. We are preparing to launch a new product based on 64-bit software and we can't integrate your board without a 64-bit BSP. Please let me know if you can provide a 64-bit build or not.

Thank you,
Jim