Topic: issue with board voltages  (Read 7433 times)

mpastore August 31, 2012, 12:50 PM

  • Member
  • *
  • Posts: 1
Hello,

My FMC150 suddently stopped working (no clock, no deac output) and I suspect a problem with the onboard voltage regulators. I made the following observation :
  • when plugged-in the 2 LED (power_en and power_ok) are on. As soon as I program the fpga (so when the compenents get configured by spi), power_ok is switched off and only power_en stays on.
  • I got 3.3V/12V and 2.5V on the 3.3V/12V and Vaux tests points
  • On the others tests points (1V8xx, 3v3A_x, 3v8, AVDD...) measured voltages do not match test points labels (all measured voltages seem to be between 0.5V and 1V)
Still, I cannot  find the faulty component... Has anyone a hint ?

By the way, I'm using the fm150 with the ml605 evaluation board and the ml605_fmc reference design.

Regards,
Matthieu