Dual Base Camera link frame grabber with video processing resources
VID472
Description
The VID472 is a high performance PMC/XMC camera link frame grabber with two mini CL connectors in order to connect 2 independant cameras. It offers fast on-board memory resources and two Virtex-4 FPGAs for real time video processing. This product can also be used in PCI and PCI-express desktop PCs with a PCI to PMC or PCI-express to XMC adapter.
For medium/full configurations, please refer to the VID471.
Enlarge diagram | | Enlarge photo
Features
Camera link frame grabber
• Two Base configurations via two mini CL connectors
FPGA
• High speed DSP processing in two Xilinx Virtex-4 ® FPGA
• XC4VSX55, XC4VLX40, XC4VLX60, XC4VLX80, XC4VLX100 or XC4VLX160
• XC4VFX20 or XC4VFX60 with embedded PowerPC RISC processor
• FPGA configuration on-board storage
• Off-the-shelf IP cores for real time compression (JPEG, edge detection)
• FPGA firmware design services available upon request
Memory
• 2 x 32M x 16 DDR2 SDRAM (128MB)
• 4 x 2M x 32 QDR2 SRAM devices (32MB)
• 128Mbit flash device
PCI interface
• PCI-X 64-bit 133MHz, 3.3V
• PCI-X/PCI 64/32-bit 66MHz, 3.3V
• PCI 64/32-bit 33MHz, 3.3V
• PMC Pn4 64 I/O connected to FPGA A
Measured sustained bandwidth
64-bit 133MHz = 760Mbytes/s
64-bit 66MHz = 450Mbytes/s
32-bit 33MHz = 120Mbytes/s
Software Support
• FPGA reference design
• API, documentation and sample source code
• Software utility to program on-board Flash with FPGA configuration data
• Device driver for Windows 2000/XP, Linux and VxWorks
• Test /demonstration application
• Custom FPGA firmware /application /driver development available upon request
Ordering information
Request more information or purchase this module by sending an email to sales@4dsp.com
Downloads
