FMC432

FMC - FPGA Mezzanine Card

High Pin Count FMC for high speed data communication over copper
Dual 10 Gigabit Ethernet FMC

FMC432

  • Description

      The FMC432 is a dual 10 Gigabit Ethernet (10GBASE-T) FPGA Mezzanine Card with two RJ45 connectors available on the front panel. Compliant with the VITA 57.1 standard the FMC432 is compatible with FPGA carrier cards offering High Pin Count connectors. It also allows for the option to stack an additional FMC over it. Any of the 4DSP FMC that use LVDS and single ended signaling only can be mounted over the FMC432, thus offering users with the ability to build a complete high speed data acquisition, waveform generation and communication solution while using a single FMC site on an FPGA carrier card.

      The FMC432 is an ideal solution to bring high speed Ethernet connectivity to an FPGA based system and ensure reliable external communication.

  • Features
      Dual 10 GbE (10GBASE-T) over RJ45
      Conduction cooled compatible
      ANSI/VITA 57.1-2010 compliant
      1.8V to 3.3V VADJ operation
      HPC (High-Pin Count) 400 pins connector
      MIL-I-46058c conformal coating (optional)
  • Application
      Ethernet Data communication
      Software defined radio (SDR)
      RADAR/SONAR
      Wireless communication receivers
      Medical equipment
      Aerospace and test measurement Instruments
  • Board Support Package
      User manual
      Performance guide
      Reference Firmware design (VHDL) with Stellar IP framework and AXI bus support
      Reference Xilinx Vivado project for multiple FPGA boards
  • Environmental
      EnvironmentalAir-cooledConduction-cooled
      ANSI/VITA 47EAC4EAC6ECC1ECC4
      Operating Temperature0C to +55C-40C to +70C0C to +55C-40C to +85C
      Storage Temperature-40C to +85C-50C to +100C-40C to +85C-55C to +105C
      Humidity95%95%95%95%
      Operating Vibration5Hz to 100Hz, PSD = 0.04g2/Hz

      100Hz to 1000Hz PSD = 0.04 gs^2/Hz

      1000Hz to 2000Hz PSD decreasing at 6 dB/ octave
      5Hz to 100Hz, PSD = 0.04g2/Hz

      100Hz to 1000Hz PSD = 0.04 gs^2/Hz

      1000Hz to 2000Hz PSD decreasing at 6 dB/ octave
      5Hz to 100Hz PSD increasing at 3 dB/ octave

      100Hz to 1000Hz PSD = 0.1 g^2/Hz

      1000Hz to 2000Hz PSD decreasing at 6 dB/octave
      5Hz to 100Hz PSD increasing at 3 dB/ octave

      100Hz to 1000Hz PSD = 0.1 g^2/Hz

      1000Hz to 2000Hz PSD decreasing at 6 dB/octave
      Operating Shock20g, 11 millisecond, half-sine or 20g, 11 millisecond, terminal sawtooth shock pulses in all three axes20g, 11 millisecond, half-sine or 20g, 11 millisecond, terminal sawtooth shock pulses in all three axes40g, 11 millisecond shock half-sine or 40g, 11 millisecond, terminal sawtooth shock pulses in all three axes40g, 11 millisecond shock half-sine or 40g, 11 millisecond, terminal sawtooth shock pulses in all three axes
      Operating Altitude-1500 ft to 60,000 ft
      (with airflow)
      -1500 ft to 60,000 ft
      (with airflow)
      -1500 ft to 60,000 ft-1500 ft to 60,000 ft
      Conformal CoatingOptionalOptionalOptionalOptional

Talk to us about your algorithmic requirements, 4DSP is a full-service firmware and software development house. We are specialists at high performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf.