Find it Fast  Find it Fast  




Form Factor

Show IP Cores?

Clear See Results

AS9100C certified


FMC - FPGA Mezzanine Card

RF transceiver FMC 0.4-3.0GHz*
FMC-LPC VITA 57.1 Compliant

*The FMC30RF is available with two different receiver ranges: 400MHz to 1.2GHz or 1.2GHz to 3.0GHz. See ordering information.



The FMC30RF is an FMC Daughter Card which is fully compliant with the VITA 57.1-2010 standard. The FMC30RF offers in a small footprint a low power and fully featured Rx / Tx signal path for the development and deployment of advanced RF solutions. With a frequency range coverage from 400MHz to 3.0GHz* and up to 60MHz* bandwidth the FMC30RF provides flexibility and reconfigurability to a host of applications.

Based on Texas Instruments RF technology the FMC30RF comprises of a dual DAC Tx IQ modulator, a dual ADC Rx IQ demodulator with PGA and LNA front-end and on-board clocking with integrated PLL/VCO. The FMC30RF allows flexible control on sampling frequency through serial communication busses. Furthermore the card is equipped with power supply and temperature monitoring and offers several power-down modes to switch off unused functions.

* Bandwidth is limited to 30MHz when the TRF3711 Low Pass Filter is not bypassed.


  • Conduction cooled compatible
  • ANSI/VITA 57.1-2010 compliant
  • RF coverage from 400Mhz to 3.0GHz*
  • Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Low Power, Small Footprint
  • Complete transceiver signal chain solution for up to 60MHz* bandwidth
  • Dual DAC, IQ modulator for Tx
  • Dual ADC, IQ modulator with PGA, buffer and filters for Rx
  • On-board clocking with integrated PLL/VCO
  • LNA front-end
  • LPC (Low-Pin Count) 160 pins connector
  • Phase locking for clocks and RF between two boards
  • MIL-I-46058c compliant (optional)

* Bandwidth is limited to 30MHz when the TRF3711 Low Pass Filter is not bypassed.

FMC645 Block Diagram



  • Portable Software-Defined Radio
  • Wireless Infrastructure for single & multi-carrier CDMA, WCDMA, TD-SCDMA and 5-20MHz LTE, WiMAX, 802.15 RF links
  • Wireless Backhaul, Point-to-Point
  • MIMO systems

Texas Instruments devices implemented and supported on the FMC30RF

  • AFE7225: Dual 12-Bit, 125 MSPS ADC with dual 12-Bit, 250 MSPS D/A
  • TRF372017: 300 MHz to 4.8GHz Quadrature Modulator with integrated wideband PLL/VCO
  • TRF3711 series: Wide Bandwidth Integrated Direct Downconversion Receivers
  • TRF3765: Integer-N/Fractional-N PLL with Integrated VCO
  • CDCE62005: 10 Outputs Clock Generator/Jitter Cleaner with Integrated Dual VCO

FMC30RF CAD drawing

Operating Temperature0°C to 70°C-40°C to 85°C
Storage Temperature-50°C to 125°C-50°C to 125°C
Humidity-Operating0 to 100%
non condensing
0 to 100%
non condensing
Storage Humidity0 to 100%0 to 100%
Vibration Random0.1 g2 /Hz
10 - 3kHz
0.1 g2 /Hz
10 - 3kHz
Shock30g peak30g peak

Talk to us about your algorithmic requirements, 4DSP is a full-service firmware and software development house. We are specialist at high performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf.

©2006-2012 4DSP LLC™ All Rights Reserved