» User's Manual
» Block Diagram
» Board Image
» Ordering Information
FM680 Virtex-6™ XMC & PMC with User Definable Memory & I/O
Description
The very versatile FM680 is a high performance Xilinx Virtex-6™ based XMC & PMC industry standard VITA 42.3 compliant module. The FM680 has been designed to be a multi-function high-performance digital signal processor. The Virtex-6™ FPGA device available on board is user programmable and can be used for the implementation of high end signal processing algorithms. Based on customer requirements, front panel I/O modules may be added to enable the FM680 to perform data acquisition and waveform generation, high-speed communication, image processing and many complex DSP applications. Additionally, customer may configure the FM680 select from a variety of memory options such as QDRII SRAM, DDR2 SDRAM and DDR3 SDRAM. Optionally, the user configurable BLAST™ mounting sites may also be populated with JPEG2000 CODECs, solid-state flash drives or even a customer's specific logic devices or circuit designs.
Enlarge diagram
| Enlarge photo
Features
FPGA- Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T
- Virtex-5 Local I/O Controller
- High density Memory Options (DDR3 SDRAM, QDR2 SRAM, NAND Flash)
- Onboard 128Mbit Flash ROM
- XMC PCIe 4-lane
- PMC 32/64-bit 33/66/133MHz Bus Interface
- Front Panel I/O Daughter Cards for A/D, D/A
- New: Supports all 4DSP FMC products
- Consult Ordering Information for all options
- Configure the FM680 board to meet your requirements
- Please observe notes relative to BLAST™ & Daughter Card Options
- Your board will be built to the specifications you select in the below part number options
- Custom BLAST™ modules are available upon request
- See available daughter card options
| Environmental | Level A | Level B |
|---|---|---|
| Operating Temperature | 0°C to 70°C | -40°C to 85°C |
| Storage Temperature | -50°C to 125°C | -50°C to 125°C |
| Humidity-Operating | 0 to 100% non condensing | 0 to 100% non condensing |
| Storage Humidity | 0 to 100% | 0 to 100% |
| Vibration Random | 0.1 g2/Hz 10 - 3kHz | 0.1 g2/Hz 10 - 3kHz |
| Shock | 30g peak | 30g peak |
| Coating | None | Conformal |
- Stellar IP available for this product. A simple way to design FPGA firmware with automated code and bitstream generation
- Board control and monitoring tools
- Flash programming utility
- Confidence tests
- Host side API
- Software program example
- Xilinx ISE projects for both FPGA
- Test firmware and VHDL source code
- Drivers for Windows, Linux, VxWorks
- Software Defined Radio (SDR)
- RADAR/SONAR Image Processor
- Satellite communication systems
- RADAR & Radio Jamming
- JPEG2000 Video Image Processors
- Baseband Communication Transceivers
- Multi-Channel digital receivers
- 1M-point floating-point FFT processing
- Event Processor & Recorder
