FM577 Cyclone III PMC
Description
The FM577 is a low-cost, low-power 65nm FPGA-based board available in the PMC form factor.
The architecture is based on two very competitive and resourceful Cyclone III FPGA devices. The FM577 offers high-functionality without compromising the performance or the ease of design. The board also features high-density DDR2 SDRAM memory devices for memory-intensive algorithms.
The FM577 can operate in thermally challenged environments. It is suitable for automotive, consumer, display, industrial, military, video/image processing and wireless markets.
Enlarge diagram | | Enlarge photo
Features
Conduction cooled -optional.
FPGA
• High speed DSP processing in Altera Cyclone III ® FPGA
• FPGA A: EP3C40
• FPGA B: EP3C120 with up to 288 Multipliers, almost 4Mbits of memory
• FPGA configuration on-board storage
• Off-the-shelf IP cores
• FPGA firmware design services available upon request
Memory
• Up to 4 banks x (1G x 8-bit) DDR2 SDRAM (up to 4GB)
• 128Mbit flash device
PCI interface
• PCI 64/32-bit 66MHz, 3.3V
• PCI 64/32-bit 33MHz, 3.3V
Measured sustained bandwidth
64-bit 66MHz : Peaks at 512MBytes/s
32-bit 33MHz : Peaks at 132MBytes/s
I/O and Front Panel Interface
• PMC connector Pn4 64 user I/Os, 32 LVDS pairs or 64-bit single ended
• Front Panel I/O daughter cards (see table below)
Description |
Part number |
Front Panel Data Port |
FP-FPDP |
1GBytes DDR2 SDRAM |
FP-DDR1G |
Camera link |
|
JPEG 2000 compression |
|
LVDS 32-pair |
FP-LVDS |
2 A/D ch 125MSPS & 2 D/A ch 500MSPS |
ADC250 * |
4 A/D ch 125MSPS |
ADC284 * |
2 A/D ch 210MSPS |
ADC290 * |
* Fitted on side 2 of the FM577 PMC. Compliant to the PrPMC standard.
Software Support
• FPGA reference design
• Software GUI for card control
• Software utility to program on-board Flash with FPGA configuration data
• Device driver for Windows 2000/XP, Linux and VxWorks
• Test /demonstration application
• Custom FPGA firmware /application /driver development available upon request
Application examples
• Real-time DSP functions (e.g. Floating Point FFT, FIR, Polyphase filterbanks, DDC, etc...)
• Video frame grabber and compression algorithm( JPEG, MPEG, etc)
• Data acquisition and processing
• Radar Signal Processing (Doppler filter, Pulse compression, CFAR)
• Vector processing
• Timing generation
• Embedded processors
• ASIC prototyping
Ordering information
Request more information or purchase this module by sending an email to sales@4dsp.com
Downloads
