FM488 Virtex-5 PMC/XMC
The PMC with the most FPGA logic and DSP resources!
Description
The FM488 is a high performance PMC/XMC module . Built on the success of the FM48x series, the FM488 offers two Virtex-5 FPGAs with large memory resources. As the most advanced reconfigurable computing platform available and with a variety of front panel I/O daughter cards, the FM488 brings high performance and flexibility to a wide range of industries.
Enlarge diagram | | Enlarge photo
Features
Conduction cooled -optional.
FPGA
• High speed DSP processing in Xilinx Virtex-5® FPGA
XC5VLX110T, XC5VSX220T or XC5VSX330T and Virtex-5 XC5VSX35T or XC5VLX30T
• FPGA configuration on-board storage
• Off-the-shelf IP cores
• FPGA firmware design services available upon request
Memory
• 4 x 128M x 8 DDR2 SDRAM (384MB)
• 2 x 2M x 32 QDR2 SRAM devices (16MB)
• 512Mbit flash device
PCI interface
• PCI-X 64-bit 133MHz, 3.3V
• PCI 64/32-bit 66MHz, 3.3V
• PCI 64/32-bit 33MHz, 3.3V
• PCI express 4 lanes
Measured sustained bandwidth
64-bit 133MHz = 760Mbytes/s
64-bit 66MHz = 450Mbytes/s
32-bit 33MHz = 120Mbytes/s
I/O and Front Panel Interface
• PMC connector Pn4 64 user I/Os, 32 LVDS pairs or 64-bit single ended
• Front Panel I/O daughter cards (see table below)
Description |
Part number |
Front Panel Data Port |
FP-FPDP |
1Gbytes DDR2 SDRAM |
FP-DDR1G |
Camera link |
|
JPEG 2000 compression |
|
LVDS 32-pair |
FP-LVDS |
2 A/D ch 125MSPS & 2 D/A ch 500MSPS |
ADC250 * |
4 A/D ch 125MSPS |
ADC284 * |
2 A/D ch 210MSPS |
ADC290 * |
2 A/D ch 1GSPS |
ADC291 * |
2 D/A ch 1GSPS |
DAC281 * |
* Fitted on side 2 of the FM485 PMC. Compliant to the PrPMC standard.
Software Support
• FPGA reference design
• Software GUI for card control
• Software utility to program on-board Flash with FPGA configuration data
• Device driver for Windows 2000/XP, Linux and VxWorks
• Test /demonstration application
• Custom FPGA firmware /application /driver development available upon request
Application examples
• Real-time DSP functions (e.g. Floating Point FFT, FIR, Polyphase filterbanks, DDC, etc...)
• Video frame grabber and compression algorithm( JPEG, MPEG, etc)
• Data acquisition and processing
• Radar Signal Processing (Doppler filter, Pulse compression, CFAR)
• Vector processing
• Timing generation
• Embedded processors
• ASIC prototyping
Ordering information
Request more information or purchase this module by sending an email to sales@4dsp.com
Downloads
