FM485 Virtex-5 PMC/PMC-X
Description
The FM485 is a high performance PMC/PMC-X module dedicated to data acquisition, processing and communication applications with complex requirements. Built on the success of the FM48x series, the FM485 offers fast on-board memory resources and two FPGAs (Virtex-4 and Virtex-5). High bandwidth communication throughput is easily achieved via optical transceivers for applications where data acquisition, processing and real time recording cannot suffer the bandwidth throttle associated with conventional processors.
Enlarge diagram | | Enlarge photo
Features
Conduction cooled -optional.
FPGA
• High speed DSP processing in Xilinx Virtex-5® FPGA
• XC5VLX50T, XC5VLX85T, XC5VLX110T, XC5VSX50Tor XC5VSX95T
• Virtex-4 XC4VFX20 or XC4VFX60 with embedded PowerPC processors
• FPGA configuration on-board storage
• Off-the-shelf IP cores
• FPGA firmware design services available upon request
Memory
• 4 x 128M x 8 DDR2 SDRAM (256MB)
• 2 x 2M x 32 QDR2 SRAM devices (16MB)
• 512Mbit flash device
PCI interface
• PCI-X 64-bit 133MHz, 3.3V
• PCI 64/32-bit 66MHz, 3.3V
• PCI 64/32-bit 33MHz, 3.3V
Measured sustained bandwidth
64-bit 133MHz = 760Mbytes/s
64-bit 66MHz = 450Mbytes/s
32-bit 33MHz = 120Mbytes/s
I/O and Front Panel Interface
• PMC connector Pn4 64 user I/Os, 32 LVDS pairs or 64-bit single ended
• Front Panel I/O daughter cards (see table below)
Description |
Part number |
Front Panel Data Port |
FP-FPDP |
1Gbytes DDR2 SDRAM |
FP-DDR1G |
Camera link |
|
JPEG 2000 compression |
|
LVDS 32-pair |
FP-LVDS |
2 A/D ch 125MSPS & 2 D/A ch 500MSPS |
ADC250 * |
4 A/D ch 125MSPS |
ADC284 * |
2 A/D ch 210MSPS |
ADC290 * |
2 A/D ch 1GSPS |
ADC291 * |
2 D/A ch 1GSPS |
DAC281 * |
* Fitted on side 2 of the FM485 PMC. Compliant to the PrPMC standard.
Software Support
• FPGA reference design
• Software GUI for card control
• Software utility to program on-board Flash with FPGA configuration data
• Device driver for Windows 2000/XP, Linux and VxWorks
• Test /demonstration application
• Custom FPGA firmware /application /driver development available upon request
Application examples
• Real-time DSP functions (e.g. Floating Point FFT, FIR, Polyphase filterbanks, DDC, etc...)
• Video frame grabber and compression algorithm( JPEG, MPEG, etc)
• Data acquisition and processing
• Radar Signal Processing (Doppler filter, Pulse compression, CFAR)
• Vector processing
• Timing generation
• Embedded processors
• ASIC prototyping
Ordering information
Request more information or purchase this module by sending an email to sales@4dsp.com
Downloads
